How To Produce Coloured VITAMIN-C, COATING OF ASCOBIC ACID PRODUCTION PROCESS

Before we dive into the production process please make sure you have a pharmacist certificate and you ensure you are qualified for doing the production to avoid taking human life, this might end you up in life sentence.

Vitamin-c production process step by step instructions

1) Ensure that the environment for the production is neat and the machines for this production are watched and linxed. Also before claiming that the machines are clean ensure that theirs a lab personnel assisting the production to avoid bacteria and deadly substances contaminating the vitamin-c.

2)get the required raw material for the production ready before starting the production and also ensure that where you are keeping the raw material is clean and also have AC that will increase the cooling temperature and make sure that the raw materials are not expired.

3)before starting the production make sure that all the people involved in the production, including the pharmacist are putting on the necessary kits for the production like

– Lab coat

– lab shoes

– nose mask

– gloves

And other necessary kits, this kits are not only for the purpose of ensuring that the medicine is not contaminated but also to ensure that doing the production are not harmed by raw chemicals (raw material), and those doing the production should avoid taking raw materials whether it’s eatable or not.

4) Ensure that electricity is constant and ready during the production in order to avoid medicine developing unnecessary issues during production.

Raw material required for production of vitamin-c

Firstly for coating Ascorbic acid before production 

1)Ascorbic Acid 

2)Sodium EDTA 

3)Ethyl Cellulose 

4)Ethanol

Secondary for the colored vitamin-c production

1)Starch

2)Coated Ascorbic acid

3)Dextrose Monohydrate

4)Orange flavour

5)Aspartame

6)Sweetner

7)Orange flavour (liquid)

8)Magnesium stearate

9)s-yellow

10)sodium propyl

11)ethanol

12)providone

Before the production process start, a quick reminder ensure everyone involved in the production are putting on production kits to avoid danger and remove hand from moving machine, and also ensure that everyone doing the production watched their hands with ethanol before putting on their gloves.

Machines for the production start’s with

1) large electric kettle

2)weighing machine

3)rapid mixer granulator

4)breakflu dryer

5)rapid grinding machine

6)blending machine

7)compressing machines

The vitamin-c will go through all this machine in order to ensure successful production.

MIXING PROCESS

before starting mixing use the large electric kettle to boil water and ensure the the water is a treated water that is coming from the dispense area of the production.

Then bring out all the above mention raw material Firstly coating of Ascorbic acid is the first process for the coloured vitamin-c production.

-So weigh 100k of Ascorbic acid (raw material) and pour it inside the rapid mixer granulator.

-weigh and pour 200g of sodium EDTA inside the rapid mixer granulator.

-weigh and pour 75g of s-yellow inside the rapid mixer granulator.

Then dry mix it for 30 mins by turning on the rapid mixer granulator on, after that measure Ethyl cellulose of 1kg and pour it inside a clean big bowl, then melt it with 10 litres of ethanol, turn it to ensure that it all melted and before you pour it inside the rapid mixer granulator for wet mixing ensure that it have all melted into liquid form. After dry mixing for 30 mins (granulating) then pour the liquid melted Ethyl cellulose inside the rapid mixer granulator then start wet mixing by turning on the rapid mixer granulator and this time around leave it to mix for up to 15 mins.

After wet mixing (granulating) it for 15 mins get breakflu dryer ready then bring out the breakflu dryer mesh, move it to the rapid mixer granulator discharge area and ensure that the rapid mixer granulator discharge area is inside the mesh to avoid discharging medicine on the ground, and before moving the mesh to discharge area make sure that the under of the mesh is fixed well by a mechanical engineer or a professional handling the breakflu machine. After moving the mesh to the discharge area, discharge the medicine slowly by turning on and off of the rapid mixer granulator or by reducing the speed of the rapid mixer granulator, after successfully discharging the coated ascobic acid inside the breakflu dryer mesh then move it to the breakflu dryer.

DRYING PROCEESS OF COATED ASCOBIC ACID

Drying coated ascobic acid doesn’t take long due to 100% use of ethanol for the mixing, but this statement is a matter of the quantity of the mixed coated ascobic acid, of course it doesn’t apply much.

– push the breakflu dryer mesh inside the breakflu dryer where it belongs.

– dry for 20 mins interval times 3, and for each interval turn the coated ascobic acid on the mesh then put it back on the breakflu dryer for another interval, repeat process till 3 times of each being 20 minutes this it is to reduce hardness of the coated ascobic acid during grinding process.

– after drying move the mesh to rapid grinding machine.

GRINDING PROCESS

this requires no much process, all you to do is set up the grinding machine, and make sure there’s a container where the grinded coated ascobic acid will be entering and also ensure that the container or the machine is not wet on anyway

– grind the coated ascobic acid and after grinding cover and store the the grinded coated ascobic acid in a cool environment for vitamin-c production colored vitamin-c.

CONCLUSION

This process is how to coat ascobic acid before production, please all the warnings on this article is not a joke, and will result to a serious issue, if you have successful finished ascobic acid and in need for the colored vitamin-c production process please kind visit the next post related to the production of coloured vitamin-c.